Frequency inverter parameters are typically organized by functional groups.
They are displayed in two formats:
- Quick Setup
- Full Setup
Các thông số có thể được cài đặt theo 2 cách:
- Thao tác trên bàn phím của biến tần
- Thông qua cổng truyền thông RS485
.jpg)
1. Basic parameters of the VFD-C2000 inverter: (Quick Setup)
- Main frequency source (00-20)
- Operation source (00-21)
- Stopping method (00-22)
- Maximum operating frequency (01-00)
- Acceleration time (01-12)
- Deceleration time (01-13)
2. The group of VFD-C2000 inverter parameters: (Full Setup)
- Group 0: Control parameters
- Group 1: Basic parameters
- Group 2: Digital input/output parameters
- Group 3: Analog input/output parameters
- Group 4: Multi-speed operation parameters
- Group 5: Motor parameters
- Group 6: Protection parameters
- Group 7: Special parameters
- Group 8: PID parameters, advanced functions
- Group 9: Communication parameters
- Group 10: Speed feedback parameters
- Group 11: Advanced control parameters
Frequency inverters are commonly controlled through basic methods such as: - Control via the panel on the inverter - Control via PLC or external ON/OFF circuits - Control via HMI or industrial communication networks"
During operation, there are many factors that can cause errors affecting the inverter, such as temperature, installation environment, operating load, and operation, etc. Therefore, many errors occur in the inverter. The following are common inverter errors that are described below:
Using the integrated PLC function in inverters helps reduce investment costs, installation labor, and installation space. The function operates, uploads, downloads, and monitors data just like an independent PLC.
Copyright © 2020 Copyright Belong To ISC AUTOMATION CO. LTD Thiết kế và phát triển bởi P.A Việt Nam
Online: 19 | Total People Online : 674887
